Procurar Grânulos De Poliestireno Expansíveis, Grânulos Virgens, Resina De Injeção De PP no diretório Industry Directory, fabricante / fornecedor / Fábrica confiável a partir de China
novos produtos
Tipo de pagamento: | L/C, T/T, Western Union, Money Gram |
---|---|
Quantidade de pedido mínimo: | 10 |
Modelo: ns-23
em | Test data | comments |
proportion g/cm3 | 0.959 | ISO 1183 |
melt flow rate(190°C/5.0kg)g/10min | 0.22 | ISO 1133 |
Carbon black dispersion | ≤ 3 | ISO 18553 |
Carbon black content | ≥ 2.0% | ASTM D-1603 |
tensile modulus MPa | 1100 | ISO 527-2/1 |
tensile stress (yield) MPa | 25.0 | ISO 527-2/50 |
tensile strain(breakage) | >600% | ISO 527-2 |
Resistance to slow crack growth 3(80°C) | >1000hr | ISO 13479 |
Resistance to rapid crack propagation | > 10.0bar | ISO 13477 |
Oxygen induction time | > 20min |
Item | Unit | Test Standard | Value |
Melt flow rate | g/10min | ISO 1133 | 12 |
Tensile modulus of elasticity(v=1mm/min) | Mpa | ISO 527-2 | 1550 |
Tensile yield at stress(v=50mm/min) | Mpa | ISO 527-2 | 35 |
Tensile yield at strain (v=50mm/min) | % | ISO 527-2 | 8 |
Tensile strain at break (v=50mm/min) | % | ISO 527-2 | >50 |
Charpy impact strength unnotched(+23°C) | kJ/m2 | ISO 179/1eU | 110 |
Charpy impact strength notched(+23°C) | kJ/m2 | ISO 179/1eA | 3.0 |
Izod Impact strength notenched(+23°C) | kJ/m2 | ISO 180/1A | 3 |
Ball indentation hardness(H 358/30) | Mpa | ISO 2039-1 | 78 |
Melting point,DSC | °C | ISO 3146 | 163 |
Heat deflection temperature (0.45Mpa) | °C | ISO 75-2 | 85 |
Vicat softening temperature VST/A50(10N) | °C | ISO 306 | 154 |
Density | g/cm3 | ISO 1183 | 0.91 |
Item | Test Condition | Test Method | Value | Unit |
MFR | 190°C/2.16kg | ASTM D-1238 | 20 | g/10min |
Density | --- | ASTM D-792 | 0.954 | g/cm3 |
Tensile strength at yiled | --- | ASTM D-638 | 28 | MPa |
Elongation at break | --- | ASTM D-638 | 250 | % |
Impact tensile strength | --- | ASTM D-1822 | 42 | kJ/m2 |
ESCR | | ASTM D-1693 | 3 | --- |
VACIT | --- | ASTM D-1525 | 127 | °C |
Item | Test condition | Test Method | Value | Unit |
Density | | ISO 1183 | 0.944-0.955 | g/cm3 |
MFR | 190°C/2.16kg | ISO 1133 | 0.03-0.07 | g/10min |
Tensile strength at yield | | ISO 527-2 | 22 | MPa |
Elongation at break | | ISO 527-2 | >350 | % |
ESCR | F50,50°C,100% | ASTM D-1693A | 1000 | h |
VICAT | | ASTM D-1525 | 126 | °C |
Item | Test Condition | Test Method | Value | Unit |
Density | | ISO 1183 | 0.950~0.955 | g/cm |
MFR | 190°C/2.16kg | ISO 1133 | 1.7~2.5 | g/10min |
Tensile strength at yield | | ISO 527-2 | 24 | MPa |
Elongation at break | | ISO 527-2 | >600 | % |
Grupo de Produto : Resina plástica > Outros resina plástica